The Humimeter BP1 is a powerful wood pellets moisture tester for determining the water content of all standard wood pellets and special pellets.

Handling and measurement process

In order to be able to guarantee precise measured values ​​in the long term, this leads to Humimeter BP1 The pellet moisture meter automatically carries out a self-calibration after switching on.

Then select the characteristic curve for the type of pellet you want to measure and fill the measuring chamber with the appropriate amount of pellets.

A scale and a measuring cup are included in the scope of delivery.

The water content can be seen immediately from the illuminated, large-area display of the Humimeter BP1 read and, if necessary, saved and edited using the integrated data logger.

Application

The device is perfect for quality control in the manufacture, temporary storage or incoming inspection of wood pellets or special pellets (thistle, straw, rapeseed, miscanthus...).

The measured values ​​can be recorded via the integrated data logger of the Humimeter BP1 You can also save it, add additional data and retrieve it later. You also have the option of using a hold function.This allows measured pellet moisture values ​​to be frozen on the display until the next button press.

In order to increase the measurement accuracy and reproducibility, the measurement is carried out with hectoliter compensation. This is achieved by accurately weighing the sample amount. A scale and a measuring cup are included for this purpose. Bulk density does not affect the measuring result.The entire device series was calibrated and checked using the calibratable drying method CEN/TS14961:2005. 

At the same time, the sample temperature is measured, displayed and included in the pellet moisture calculation. The temperature range is from 0°C to 40°C and can be displayed in either °C or °F. The calibrated measuring range extends from 3% to 20% water content (depending on the type).

Another great feature of the Humimeter BP1 is the optionally available USB interface. This interface can be used to connect to a PC. Using the LogMemorizer software supplied, the values ​​can be read from the device, edited, provided with additional information, archived, exported and further processed. Using this interface, the water content, sample temperature, additional information and special device data of the Humimeter BP1 pellets moisture meter can be output at the push of a button on the interface and further processed by another PC program.

As an additional option, we offer a portable and handy thermal printer. With the help of this printer, stored data can be printed out on site without a PC.

These printouts can be given to the supplier as receipts.

The following requirements are met:

• Measuring device based on the requirements of the VDI standard 4206 sheet 4
• Material characteristics in accordance with EN ISO 16559 requirements
• Measuring device adjusted after calibration to the reference method EN ISO 18134-2

Benefits

• Measurement within seconds
• High measuring range from 3% to 20% water content
• Data log function for measured values ​​and supplier data
• On-site quality control
• Easy to use
• Optional USB interface

Video Youtube

humimeter BP1 wood pellets moisture meter - handling / measuring procedure (youtube.com)

Scope of delivery

Humimeter BP1 with rubber protection cover, digital scale, plastic case, measuring cup 0.5l and batteries