The AlphaBlower 2200 from RadonTec is a high-performance, energy-efficient radon extraction fan designed to remove radon from beneath a building’s floor slab.

The fan’s inlet and outlet connections are DN50, ensuring easy installation.

Key Features:

Designed for installation in a vacuum pipe system

Maximum negative pressure: 2200 Pa
Maximum flow rate: 130 m³/h
20-stage manual speed control for precise adjustment
LED status indicators for easy monitoring
Gas-tight, high-quality construction for long-lasting performance

With its compact design, energy efficiency, and premium components, the AlphaBlower 2200 delivers reliable radon extraction while maintaining optimal performance. It features manual speed adjustment in 20 stages and can be integrated with our AlphaSensor radon sensor for dynamic control.

AlphaBlower 2200 – Easy Installation, Safe Operation & Maintenance

1. Easy Installation

The AlphaBlower 2200 comes with a wall bracket for simple and secure wall mounting, ensuring hassle-free setup.

2. User-Friendly Operation

Easily adjust the airflow rate using the + and - buttons for precise control.

3. Safe Indoor Use

Designed for indoor operation at room temperature

Must be protected from moisture and direct sunlight

4. LED Status Indicators

Stay informed with three LED signals:

Green LED – Ready for operation

Yellow LED – Maintenance interval reached (after 9000 operating hours)

Red LED – Fault or blockage detected, cleaning required

Installation Guidelines

The AlphaBlower 2200 must be installed in a stable, fixed location within the building.
To prevent condensation issues, install the unit and pipework in heated areas or insulate the pipes. Ensure no condensate flows back into the device, as this can cause damage.
Installation must be carried out by a qualified specialist or someone with the necessary expertise.

Maintenance

Service interval: Every 9000 hours – must be reset regularly.
Cleaning: When the red LED lights up and a warning tone sounds, cleaning is required.
Auto shut-off: If a blockage isn't cleared within 5 minutes, the device switches off automatically.

The AlphaBlower 2200 is designed for reliable, long-term radon extraction with minimal maintenance—ensuring safety, efficiency, and ease of use.

Important Safety Information

The exhaust air must not be directed into living spaces or near terraces to prevent exposure to radon.
Ensure a minimum distance of 2 meters from any windows to maintain safe air quality.
Improper use can pose serious health risks, so it is essential to follow all safety guidelines carefully.

FAQ

When does the AlphaBlower 2200 need servicing?

After 9000 operating hours, the device emits a warning tone to signal that maintenance is due.

Can the AlphaBlower 2200 be installed outdoors?

No, the device is designed for indoor use only and must operate at room temperature.

What happens if the airflow is blocked?

If airflow is obstructed, the red LED lights up, and the unit will shut down automatically after 5 minutes if the issue isn’t resolved.

Technical Data

Maximum vacuum: 2200 Pa – Powerful radon extraction
Maximum air flow rate: 130 m³/h – Efficient air exchange to lower radon levels
Power consumption: 70 W – Energy-efficient performance
Power supply: 230 V / 50 Hz via a single-phase safety transformer
Noise level: < 40 dB(A) at 1m – Quiet operation, suitable for living spaces
Dimensions: 360 x 320 x 200 mm – Compact design for easy installation
Overvoltage protection: –

Scope of delivery